Continuous palstic pyrolysis plant

Continuous plastic pyrolysis plant aopts advance pyrolysis technology can convert waste plastic to fuel oil and carbon black.www(dot)continuouspyrolysisplant(dot)com
Continuous plastic pyrolysis plant environment

    Exhaust gas: exhaust gas will be sent to hydroseal and burner. This way can eliminate the exhaust gas pollution and save a lot fuel. Dust shall be treated by water spray type dust remover; the dust will be discharged only after it can meet with emission standard.
    Waste water: there is weak-acid waste water from pyrolysis. It will be neutralized by weak alkali liquid. After been cleaned by a triple filer, the neutral wastewater will be sent to evaporator. Heat source of evaporator is the flue waste heat of reactor.
    Waste residue: there is some solid reside from pyrolysis machine, its main component is carbon black. Carbon black can be sold directly, or can be processed into fine carbon black by our professional carbon black processing machine

Continuous plastic pyrolysis plantwww(dot)continuouspyrolysisplant(dot)com

Continuous plastic pyrolysis plant

1. The reactor of continuous waste plastic pyrolysis plant is a special and important design. The foundation of plant must be sturdy. After signing the contract, we always provide clients with a foundation map, and the deep of foundation should refer to the physical truth of local soil, while the other unspecified dimensions will be operated specifically according to the models and sizes of pyrolysis plants.
   
   When the horizontal error of four corners in the plane is basically not less than 10 mm, putting the plant on the plane, after that we should review the levels of the four corner to make sure the error is less than 2 mm.
   
   2. The height from the lowest of the pyrolysis reactor to the plane of grate should keep between 650mm and 700mm, and it should not be to higher or lower. Too lower heat energy can not be fully utilized, which will be taken away by draft fan, and too higher is too slow to heat, which will cause low working efficiency.
   
   3. The left, right and rear directions of the fire wall in fire chamber should keep a distance of no less than 70mm with the reactor, otherwise, it is easy to cause troubles and lead to unnecessary economic lost.
   
   4. The straight ray of tail gas combustion device is required 180 degree, and this straight ray mustn't tilt to upward, if not, it is easy to damage the reactor and reduce its service life.
   
   Continuous plastic pyrolysis plant working processwww(dot)continuouspyrolysisplant(dot)com

   
   

   

   Continuous plastic pyrolysis plant
   1. The processed raw material is put into the pyrolysis reactor automatically. When the inner temperature of the pyrolysis reactor reaches related degree, the oil gas will be generated.
   
   2. Then the oil gas goes into the manifold firstly. In the manifold, the heavy oil gas will be liquefied into heavy oil and drop in the heavy oil tank. The light oil gas rise up to the condenser, and then be liquefied into oil. In the hydroseal, the combustible gas will be desulfurated and cleaned then recycled to heat the pyrolysis reactor.
   
   3. The smoke produced when heat the reactor will be cooled down, then enters the de-dusting system. In the spraying tower, the smoke will go through the water washing, water spray, and ceramic ring adsorption, so the smoke can meet the EU environmental protection and emission standards.
   
   4. As for the carbon black, it will be discharged by the auto screw discharger.
   
   
   Final product application of waste plastic pyrolysis plant
   
   Fuel Oil (50%-75%) 1. Used as the heating material and sell it to cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc.
   2. Used in heavy oil generator for electricity generation.
   3. Deep process it into diesel oil with our distillation plant, color and smell removal system, the final oil can be used in trucks, tractor, etc.
   
   Carbon Black (30%-35%)  Slag for construction.
   
   Flammable Gas (8%-10%) 1. Recycled into furnace to heat reactor instead of coal/wood/oil/natural gas.
   
   Contact: Ms Bonnie
   Phone: +86-371-5677 1821
   Skype: bonniezhao2